Anritsu 3659, Руководство пользователя, Страница: 22 / 160

2-6 Application Interface – Setup Menu Tab Using the 2300-580-R Software with VectorStar ME7838D
2-10 PN: 10410-00327 Rev. D 3659 0.8 mm Cal/Ver Kit & 2300-580-R PVS UG
2-6 Application Interface – Setup Menu Tab
The
PVS Application Interface
dialog box displays three tabs with configuration, control, and serial number
information. Each tabbed dialog box contains buttons to control program operations as outlined in the
following sections:
• The
Setup Menu
tab is described in this section.
• The
Main Menu
tab display is described in Section 2-9, “Application Interface – Main Menu Tab”
on page 2-24 .
• The
Serial Number Info
tab is described in Section 2-10, “Application Interface – Serial Number Tab
Functions” on page 2-28 .
Procedure
The following procedure continues the program setup from the previous section:
1. In the
Calibration Kit Type
area, select
0.8 mm Coax
.
2. In the
Serial Number (5 Digits)
area, enter the serial number for the 3659 Calibration/Verification Kit. At
least five (5) digits are required.
3. In the
Load Cal-Kit Coefficients to VNA
area, select
Cal-Kit
.
4. The
Install Calibration-Kit Coefficients to the VNA
dialog box appears.
Figure 2-14. ME7838D Application Interface – Setup Menu Tab