CNC Setup Utility Manual
P/N 70000490C - Setup Utility Concepts
All rights reserved. Subject to change without notice.
10-December-04
1-4
Table 1-3, Console Switches/ Manual Panel Keys
(Continued)
Name Switch/Key
Spindle Reverse Key
Spindle Forward Key
Spindle Off Key
ENTER
Key
Press
ENTER
to enter parameters into the system.
Highlighting Menu Options
Press
Up Arrow
(
F3
)
and
Down Arrow
(
F4
) to highlight menu selections
in the Setup Utility. The corresponding arrow keys can also be used.
Exiting a Screen
Press
Exit
(
F10
) to return to the previous screen.
Password Restricted Parameters
Some machine parameters are protected by passwords. The CNC
provides four access levels of passwords. Operators are assigned limited
access, which allows them to set parameters used in normal machine
operations. Service and factory technicians require a higher level of
access. The Programmable I/O Interface requires a separate password.
See
Table 1-4
for default machine passwords.
Table 1-4, Default Machine Passwords
Access Level
Password Level
Limited – Operator
159
Service Technician
Z48
Factory Technician
Reserved for factory use
Programmable Logic Controller
IPI
NOTE:
Service supersedes Limited. Factory level is the highest and
supersedes all, except IPI, which is independent of the other
passwords.