Anilam 6000M, Руководство пользователя

Страница: 63 / 149

CNC Setup Utility Manual
P/N 70000490C - Machine Constants
All rights reserved. Subject to change without notice.
10-December-04
2-53
Table 2-2, Machine Constants Setup (Continued)
Machine Constant
Parameter Function Settings
MC_3068:
Z Segment length
Enter the desired segment length for
the Z-axis. (This value is a negative
number for the negative travel direction
with respect to the Machine Home
position.) Range (-999.00000–2032.00000)
0.00000 [Default]
MC_3069:
U Segment length Enter the desired segment length for
the U-axis. (This value is a negative
number for the negative travel direction
with respect to the Machine Home
position.) Range (-999.00000–2032.00000)
0.00000 [Default]
MC_3072:
Edit Ballscrew Table See “ Laser File Data File Format .” Table Entries – Setup
X
0.00000
Y 0.00000
Z 0.00000
U 0.00000
Software Limits Setup Parameters
MC_4001:
X+ Software Limit
Type the positive X-axis software limit.
See “
Setting Software Limits .”
Range (0.0000–12192.0000)
0.0000 [Default]
MC_4002:
Y+ Software Limit Type the positive Y-axis software limit.
See “
Setting Software Limits .”
Range (0.0000–12192.0000)
0.0000 [Default]
MC_4003:
Z+ Software Limit Type the positive Z-axis software limit.
See “
Setting Software Limits .”
Range (0.0000–12192.0000)
0.0000 [Default]
MC_4004:
U+ Software Limit
Type the positive U-axis software limit.
See “
Setting Software Limits .”
Range (0.0000–12192.0000)
0.0000 [Default]
MC_4006:
X- Software Limit Type the negative X-axis software limit.
See “
Setting Software Limits .”
Range (-12192.0000–0.0000)
0.0000 [Default]
MC_4007:
Y- Software Limit Type the negative Y-axis software limit.
See “
Setting Software Limits .”
Range (-12192.0000–0.0000)
0.0000 [Default]
MC_4008:
Z- Software Limit Type the negative Z-axis software limit.
See “
Setting Software Limits .”
Range (-12192.0000–0.0000)
0.0000 [Default]
MC_4009:
U- Software Limit
Type the negative U-axis software limit.
See “
Setting Software Limits .”
Range (-12192.0000–0.0000)
0.0000 [Default]
MC_4011:
X Software Limit
Enable
See “ Setting Software Limits .”
Off (disabled) [Default]
On (enabled)
MC_4012:
Y Software Limit
Enable See “ Setting Software Limits .” Off (disabled) [Default]
On (enabled)
(Continued…)