CNC Setup Utility Manual
P/N 70000490C - Index
Index-12
All rights reserved. Subject to change without notice.
10-December-04
MC_5006, stop program execution, 2-65,
2-87, 2-88
MC_5007, tool changer installed, 2-66, 2-87,
2-89, 2-90
MC_5008, use tool change macro, 2-66,
2-89, 2-91
MC_5009, tool change macro program, 2-66,
2-89, 2-91
MC_5010, tool change macro number, 2-66,
2-89, 2-91
MC_5011, number of digits in T word, 2-66,
2-87, 2-89, 2-90
MC_5012, number of bins in tool changer,
2-66, 2-89
MC_5013, number of tools to display in table,
2-66, 2-89
MC_5014, default tool-table file, 2-66, 2-89
MC_5015, force spindle off during tool
change, 2-67, 2-87, 2-89
MC_5018, restore TLO after power-up or
home, 2-67
MC_5019, spindle orientation type, 2-67
MC_5020, logic of device used for X30 input,
2-67, 5-16
MC_5021, spindle orientation new method
selected, 2-67
MC_5022, spindle orientation with axis move,
2-67
MC_5023, spindle orientation tolerance
(deg.), 2-67
MC_5100, interface timeout, 2-68
MC_5101, issue SpStop on SvoFlt or Estop,
2-68
MC_5102, display internal interface message,
2-68
MC_5103, gauge 1 active, 2-68
MC_5104, gauge 1 name, 2-68
MC_5105, gauge 1 type, 2-68
MC_5106, gauge 2 active, 2-69
MC_5107, gauge 2 name, 2-69
MC_5108, gauge 2 type, 2-69
MC_5109, gauge 3 active, 2-69
MC_5110, gauge 3 name, 2-69
MC_5111, gauge 3 type, 2-69
MC_5200, units, 2-70
MC_5201, language, 2-70
MC_5202, MC_2
x
22 tuning increment value,
2-70, 5-10
MC_5203, MC_2
x
23 tuning increment value,
2-70, 5-10
MC_5204, MC_2
x
26 tuning increment value,
2-70, 5-10
MC_5205, MC_2
x
29 tuning increment value,
2-70, 5-10
MC_5210, vertical axis selection, 2-70
Mcode for macro call
#1 (MC_4400), 2-63
#10 (MC_4418), 2-64
#2 (MC_4402), 2-63
#3 (MC_4404), 2-63
#4 (MC_4406), 2-63
#5 (MC_4408), 2-63
#6 (MC_4410), 2-64
#7 (MC_4412), 2-64
#8 (MC_4414), 2-64
#9 (MC_4416), 2-64
M-code for macro call
setup parameters, description, 2-86
M-Code macro call, setup parameters, table,
2-63
memory reserved from editor, (MC_1209),
2-13
menu options, highlighting, 1-4
miscellaneous, setup parameters
automatic feedrate override on arcs, 2-62
description, 2-85
display resolution, 2-62
linear axis
dry run feedrate, 2-85
jog feedrate, 2-61
jog rapidrate, 2-61
maximum programmed
linear axis feedrate, 2-60
rotary axis, feedrate, 2-61
rapid moves are free (unsynchronized),
2-62
rotary axis
dry run, feedrate, 2-61
jog feedrate, 2-61
jog rapidrate, 2-62
servo up delay, 2-62
table, 2-60
miscellaneous, tuning tests
current vs. distance plot, 5-13
listed, 5-13
overall system performance, 5-14
more, setup parameters, table, 2-70
motor resonance
avoid, 5-5
procedure to stop, 5-7
motors, axes, table, 5-3
