CNC Setup Utility Manual
P/N 70000490C - Index
Index-10
All rights reserved. Subject to change without notice.
10-December-04
MC_2964, high setting for M41 gear ranges,
2-43, 2-77
MC_2965, low setting for M42 gear ranges,
2-43, 2-77
MC_2966, high setting for M42 gear ranges,
2-43, 2-78
MC_2967, low setting for M43 gear ranges,
2-43, 2-78
MC_2968, high setting for M43 gear ranges,
2-43, 2-78
MC_2969, low setting for M44 gear ranges,
2-43, 2-78
MC_2970, high setting for M44 gear ranges,
2-43, 2-78
MC_2971, gear change RPM, 2-44
MC_2972, gear ranges used, 2-44, 2-77
MC_2973, RPM display, 2-44
MC_2974, check spindle during gear change,
2-44
MC_2975, stop program on gear change,
2-44
MC_2976, check RPM to be within gear
change, 2-44
MC_2977, stop/start spindle during hold/start,
2-45
MC_2978, number of motor teeth for M40
gear ranger, 2-45
MC_2979, number of spindle teeth for M40
gear range, 2-45
MC_2980, invert gear direction for M40, 2-45
MC_2981, number of motor teeth for M41
gear ranger, 2-45
MC_2982, number of spindle teeth for M41
gear range, 2-45
MC_2983, invert gear direction for M41, 2-45
MC_2984, number of motor teeth for M42
gear ranger, 2-45
MC_2985, number of spindle teeth for M42
gear range, 2-45
MC_2986, invert gear direction for M42, 2-46
MC_2987, number of motor teeth for M43
gear ranger, 2-46
MC_2988, number of spindle teeth for M43
gear range, 2-46
MC_2989, invert gear direction for M43, 2-46
MC_2990, number of motor teeth for M44
gear ranger, 2-46
MC_2991, number of spindle teeth for M44
gear range, 2-46
MC_2992, invert gear direction for M44, 2-46
MC_2
x
22 tuning increment value (MC_5202),
2-70, 5-10
MC_2
x
23 tuning increment value (MC_5203),
2-70, 5-10
MC_2
x
26 tuning increment value (MC_5204),
2-70, 5-10
MC_2
x
29 tuning increment value (MC_5205),
2-70, 5-10
MC_3000, linear correction compensation,
2-47
MC_3001, X linear correction compensation,
2-47
MC_3002, Y linear correction compensation,
2-47
MC_3003, Z linear correction compensation,
2-48
MC_3004, U linear correction compensation,
2-48
MC_3015, skew error compensation, 2-48
MC_3016, X skew error compensation, 2-48
MC_3017, Y skew error compensation, 2-48
MC_3018, Z skew error compensation, 2-48
MC_3019, U skew error compensation, 2-48
MC_3030, backlash compensation, 2-49
MC_3031, X backlash compensation, 2-49
MC_3032, Y backlash compensation, 2-49
MC_3033, Z backlash compensation, 2-49
MC_3034, U backlash compensation, 2-49
MC_3050, ballscrew compensation, 2-49
MC_3051, X number of segments, 2-50
MC_3052, Y number of segments, 2-50
MC_3053, Z number of segments, 2-50
MC_3054, U number of segments, 2-50
MC_3056, X offset, 2-51
MC_3057, Y offset, 2-51
MC_3058, Z offset, 2-51
MC_3059, U offset, 2-51
MC_3061, X zero cross, 2-52
MC_3062, Y zero cross, 2-52
MC_3063, Z zero cross, 2-52
MC_3064, U zero cross, 2-52
MC_3066, X segment length, 2-52
MC_3067, Y segment length, 2-52
MC_3068, Z segment length, 2-53
MC_3069, U segment length, 2-53
MC_3072, edit ballscrew table, 2-53, 2-78,
2-80
MC_4000, continuous path range, 2-54
MC_4001, X+ software limit, 2-53, 2-83
MC_4002, Y+ software limit, 2-53, 2-83
MC_4003, Z+ software limit, 2-53, 2-83
