AMX NETLINX STUDIO V2.4 Скачать руководство пользователя страница 144

Страница: 144 / 200

Working With Online Devices

132

NetLinx Studio (v2.4 or higher)

Restoring The Default Device and System Numbers On A Netlinx Device

Use the Device Addressing dialog to restore the default Device and System numbers on a NetLinx

device:

Select the target device/system in the Online Device Tree.

Right-click to access the Online Tree context menu.

Select

Set Device/System to Factory Default.

Using ID Mode To Change The Device Address On a NetLinx Device

The

ID Mode

section of the Device Addressing dialog allows you to place the program in ID

(Identity) mode. This is useful when the current address assignments are unknown.

ID Mode means that the entire system is put on hold while it waits for an event from any NetLinx

device in the named system (for example, a button push on a NetLinx Touch Panel). The device that

generates the first event is the device that gets "identified". Once a device has been identified, it will

be set (or changed to) the Device/System Address specified.

Use the ID Mode options in the Device Addressing dialog to set or change the Device Address

(Device and System ID numbers) for a NetLinx device.

Enter the

Device

and

System

numbers that you want to assign to the device in the

(Change to

Device) Device

and

System

text boxes.

Enter the Device and System numbers that you want to assign to the device in the

(Change to

Device) Device

and

System

text boxes.

Click the

Start Identify Mode

button to place the named System in ID Mode. The text box

below this button displays a

Waiting…Press Cancel to Quit

message. The

Start Identify

Mode

button changes to

Cancel Identify Mode

(click to cancel ID Mode).

Generate an event from the device that you want to assign the new Device and System numbers

to:

For NetLinx control panels, press any button to generate a Push.

For NetLinx Masters, press the ID button on the rear panel.

The device that generated an event is assigned the new Device and System numbers. The

Online Device Tree will refresh to represent the new device address.

If the target Master has security applied, NetLinx Studio will prompt you for a User
Name and Password in order to change these settings.

The Destination System number must be a System that is defined in the URL List
dialog.

Содержание NETLINX STUDIO V2.4









































































































































































































Результаты поиска

Содержание NETLINX STUDIO V2.4

Отзывы:

Похожие инструкции для NETLINX STUDIO V2.4

Бренды по названию

Популярные бренды

AMX NETLINX STUDIO V2.4, Инструкция по эксплуатации

Результаты поиска

Содержание NETLINX STUDIO V2.4

Отзывы:

Похожие инструкции для NETLINX STUDIO V2.4

Бренды по названию

Популярные бренды