AMX NETLINX STUDIO V2.4 Скачать руководство пользователя

Страница: 121 / 200

Compile Operations

109

NetLinx Studio (v2.4 or higher)

Alternatively, you can designate any Source Code file in the System as the Master Source

by right-clicking on a Source Code file (in the Workspace tab of the Workspace

Window), and selecting Set As Master from the Source Code File context menu.

Compiling an Individual File

You can select to compile a single Source Code, Include, or Module file, using the Compile,

Compile As NetLinx and Compile as Axcess commands (or toolbar buttons).

To compile an individual file:

Select the file that you want to compile:

If the file is already included in the open Workspace, click to select the file and select the

appropriate

Compile

command from the Build menu.

If the file is not part of the open Workspace, open the file via the

File > Open

command,

then right-click on the file (in the Source Code Editor window).

Select the appropriate

Compile

command. There are several ways to access the Compile

commands - via the Build menu, the System File context menus (in the Workspace tab of the

Workspace Window), the Source Code Editor context window, or via the toolbar buttons.

If you create a new non-Project related file, without a Workspace file open, the Compile

command compiles the file using the compiler (NetLinx or Axcess) associated with the

file when it was created.

If you open an existing non-Project related file, with a Workspace open, the Compile

command compiles the file using the compiler specified in the System communication

settings for the currently active System.

The

Compile as NetLinx

command compiles the selected file using the NetLinx

compiler.

The

Compile as Axcess

command compiles the selected file using the Axcess compiler.

The status and results of the build are displayed in the Status tab of the Output Display

Window.

Any errors detected by the program before the build operation starts are listed in the
Pre-Build Errors dialog. This dialog gives you the option of ignoring the errors and
continuing with the build.

Содержание NETLINX STUDIO V2.4









































































































































































































Результаты поиска

Содержание NETLINX STUDIO V2.4

Отзывы:

Похожие инструкции для NETLINX STUDIO V2.4

Бренды по названию

Популярные бренды

AMX NETLINX STUDIO V2.4, Инструкция по эксплуатации

Результаты поиска

Содержание NETLINX STUDIO V2.4

Отзывы:

Похожие инструкции для NETLINX STUDIO V2.4

Бренды по названию

Популярные бренды