AMX NETLINX STUDIO V2.4 Скачать руководство пользователя

Страница: 120 / 200

Compile Operations

108

NetLinx Studio (v2.4 or higher)

The status and results of the build are displayed in the Status tab of the Output Display

Window.

Building the Selected System

You can select to build (compile) any System in the Workspace, using the Build System command.

When you build a System, every Source Code, Include, and Module file contained in the selected

System is compiled. The Build System command always works on the selected System, regardless

of whether it is currently designated as the active system or not.

To compile a System:

Click to select (highlight) the System that you want to build (in the Workspace tab of the

Workspace window).

Select Build System <System name> from the Build menu, or select Build System from the

System Folder context menu (or click the toolbar button).

Any errors detected by the program before the build operation starts are listed in the Pre-Build

Errors dialog. This dialog gives you the option of ignoring the errors and continuing with the

build.

The status and results of the build are displayed in the Status tab of the Output Display

Window.

Building the Active System

You can select to build (compile) only the System currently designated as the Active System, using

the Build Active System command. When you compile a System, every Source Code, Include, and

Module file contained in the selected System is compiled.

To compile the Active System:

Select

Build Active System

from the Build menu, or click the toolbar button.

Any errors detected by the program before the build operation starts are listed in the Pre-

Build Errors dialog.

Assuming that a Master Source Code file has been defined for the System, this dialog

gives you the option of ignoring the errors and continuing with the build.

The status and results of the build are displayed in the Status tab of the Output Display

Window.

Designating the System's Master Source Code File

Each System must have a Master Source Code file, and only one Source Code file in the System

can be designated as the Master Source.

There are two possible ways to designate the Master Source Code file for a System:

You can designate a Source Code file as the Master Source at the time that it is added to

the System, via the Master File option in the File Properties dialog.

The currently active System is indicated in bold (in the Workspace tab of the
Workspace Window).

Содержание NETLINX STUDIO V2.4









































































































































































































Результаты поиска

Содержание NETLINX STUDIO V2.4

Отзывы:

Похожие инструкции для NETLINX STUDIO V2.4

Бренды по названию

Популярные бренды

AMX NETLINX STUDIO V2.4, Инструкция по эксплуатации

Результаты поиска

Содержание NETLINX STUDIO V2.4

Отзывы:

Похожие инструкции для NETLINX STUDIO V2.4

Бренды по названию

Популярные бренды