Wireless Device Communication Setup
29
NXA-WAP200G Wireless Access Point
2.
Click the
Wireless
tab, from the top row of the Configuration Utility to open the Basic
Wireless Configuration page (FIG. 24). The most important aspect to note when configuring
the WAP200G for unsecured (default) communication is the Country/Domain and the Wireless
transmission channel.
3.
Leave the
Enabled
radio button selected. This allows the WAP200G to broadcast the SSID
name used to connect to the device and alert all wireless clients of its presence in the area.
4.
Enter the desired SSID into the
Wireless Network Name (SSID)
field. The alpha-numeric string
is
AMX
by default but can be changed to any 32-character entry.
This string must be
FIG. 23
Default WAP200G Status page
FIG. 24
Default WAP200G Wireless Configuration page
Current WAP MAC Address
Current IP used by WAP
Network Name (SSID)
Country & Frequency
Wireless standard
Содержание Modero NXA-WAP200G
