AMX Modero NXA-WAP200G страница 74 Скачать руководство пользователя

Страница: 74 / 82

Bridge Mode Configuration Utility Pages

NXA-WAP200G Wireless Access Point

Advanced Wireless Configuration (Bridge Mode)

This page (FIG. 53) can be accessed by pressing the

Advanced

tab from the Configuration Utility.

The fields on this page allow you to configure the advanced 802.11g wireless settings.

Settings are

only incorporated after the bridge is rebooted.

These fields are described in the table below.

Advanced Wireless Configuration Page (BM) Information

Cloning

Cloning mode

This feature allows you to control the MAC Address of the Bridge as seen by
other devices on the LAN.

•

Ethernet Client

allows the MAC Address from the first Ethernet client

(printer, X-Box, PlayStation2, etc.) that transmits data through the bridge is
used.

•

WLAN Bridge

allows the MAC Address from the NXA-WAP200G to be used.

When multiple Ethernet devices are connected to the bridge, the MAC
Address of the bridge does not change.

Advanced wireless

Fragmentation threshold

Sets the upper fragmentation limit of the transmitted wireless data packets.

• Transmitted wireless data packets larger than this size will be fragmented to

maintain performance in noisy wireless networks.

• Default value is

2346

RTS threshold

Sets the upper RTS/CTS protocol limit of the transmitted wireless data packets.

• Transmitted wireless data packets larger than this size will use the RTS/CTS

protocol to maintain performance in noisy wireless networks and prevent
hidden nodes from degrading the performance.

• Default value is

2432

Maximum burst time

Sets the amount of time in microseconds) that the radio is reserved to send
data without requiring an ACK. This technology eliminates collisions in Mixed
mode networks, as well as for pure 802.11g networks.

• The optimized value for 802.11g only networks is 1400. The optimized value

for Mixed mode networks (802.11g + 802.11b) id 650.

• Default value is

650

Note:

If the value is set to zero, bursting is disabled.

Save/Cancel

• Press the

Save

button to incorporate the information to the WAP200G.

• Press the

Cancel

button to terminate the process of altering these fields.

Содержание Modero NXA-WAP200G



















































































Результаты поиска

Содержание Modero NXA-WAP200G

Отзывы:

Похожие инструкции для Modero NXA-WAP200G

Бренды по названию

Популярные бренды

AMX Modero NXA-WAP200G, Инструкция по эксплуатации

Результаты поиска

Содержание Modero NXA-WAP200G

Отзывы:

Похожие инструкции для Modero NXA-WAP200G

Бренды по названию

Популярные бренды