All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
221136 -ED0 - 10/09/2012
© 2012 SALTO Syst ems S.L.
1/3
RF Node
Installation guide
RF Node
Guía de instalación RF Node
Electrical characteristic
Características Eléctricas
Description
The RF Node is part of SALTO´s RF2 system. It works as a bridge, with the Gatewayx2,
between SALTO´s access control software and RF locks.
Descripción
El RF Node forma parte del sistema RF2 de SALTO Systems. Actúa como puente, junto
con el Gatewayx2, entre el software de control de acceso de SALTO y las cerraduras RF.
Mechanical Installation
Instalación Mecánica
Operation conditions
Min
Typ
Max
Unit
Temperature
-20
25
70
ºC
Humidity
35
85
%
Note 1: 1x2x24AWG or UTP CAT5e recommended
Note 2: Power supply must be calculated taking into account Gatewayx2 and
Nodes current consumption
2405-2480 Mhz
IEEE 802.15.4
RF Characteristics
Frequency Range
Standard
10/15m
Indoor Radio Range
7
12
28
V
mA
45
Power Supply
Imput Voltage
Current consumption
Min
Typ
Max
Unit
Note 2
Cable requirements
RS485 Connection (AB)
Generic twisted pair wire
Power Connection (Vdd)
24 AWG
Note 1
SALTO´s Software
*RS485 Bus
*Power Supply
UTP CAT5e
*RS485 Bus
*Power Supply
UTP CAT5e
Up to 6 External RF Node
per Gatewayx2
RF Node
RF Node
Up to 112 SALTO RF Lock per
Gatewayx2 (16 per RF Node)
Power
RS485 bus to Nodes
Up to 10/15m
to Node
RF Link
83
83
20
Gatewayx2
[25/32”]
[3-1/4”]
[3-1/4”]
