AMX Modero NXA-WAP200G, Инструкция по эксплуатации

Страница: 42 / 82

Wireless Device Communication Setup
36
NXA-WAP200G Wireless Access Point
5.
Click on the right drop-down arrow and choose a domain from the Country/Regulatory
Domain field listing. This selection corresponds to the country where the WAP200G is
currently being used.
6.
Click on the right drop-down arrow and choose a transmission frequency from the Channel
field listing. This listing of channels is now specific to the selected Country chosen from the
above Country/Regulatory Domain field.
7.
Click the Save button to incorporate this new information and ignore the request to reboot .
8.
Click the Security tab, from the bottom row of the Configuration Utility to open the Security
and Encryption Settings page (FIG. 31).
9.
Place a checkmark within the Enable WEP checkbox field to enable WEP encryption ( used by
the Modero touch panels ).
To implement this type of encryption, you must have the Current Key value previously
generated by the target Modero panel.
FIG. 31 Security and Encryption page
WEP Configuration
WPA Configuration
802.1x Configuration
For the purposes of these procedures, the WEP Encryption procedures and setup
parameters will be used. Refer to the Security and Encryption Settings Page
section
on page 58 for more information on the fields within the other sections of this page.