AMX Epica DGX 32, Инструкция по эксплуатации

Страница: 16 / 147

Overview and General Specifications
10 Epica DGX 32 Instruction Manual
Rear View
The enclosure’s appearance, as viewed from the rear (FIG. 2), will vary depending on the number and
types of input and output boards present.
Rear View Components
Input and output boards (some slots may be empty, depending on the configuration)
2 non-functional slots ( not designed for input or output boards)
CPU/Control board
Two standard redundant power supplies
Serial number
The following sections briefly introduce the hardware on the rear of the enclosure.
CPU/Control Board
The CPU/Control board (FIG. 3) is on the left rear of the enclosure, directly below the input connectors.
Each CPU includes the following port options:
Enc Link port (Ethernet RJ-45) – for linking to other types of enclosures (see page 21)
Control port (DB-9, RS-232) – for attaching an external control device (see page 27)
USB (mini-B) port – for attaching an external control device (see page 30)
TCP/IP (RJ-45) port – for establishing an NXB-AP-1000 Server connection (see page 40)
Each CPU includes two main LED indicators:
System Status indicator (between the Enc Link ports and the Control port)
–
for system status
NXB-AP-1000 Server LED Indicator (left of TCP/IP port) – indicates active connection
FIG. 2 Rear view of an Epica DGX 32 enclosure
FIG. 3
Epica DGX 32 CPU/Control board
Power supplies
Serial number
Input boards (up to 8)
CPU/Control board
Output boards (up to 8)
Non-functional slots
Empty input and
output board slots
available for expansion
USB (mini-B) port
Enc Link ports (Ethernet RJ-45, 10/100), use for linking enclosures
Control (DB-9, RS-232 serial) port System Status indicator
TCP/IP (RJ-45) port
NXB-AP-1000 Server
LED indicator