Overview and General Specifications
11
Epica DGX 32 Instruction Manual
Power Supply Units
Each of the power supply units on the rear of the enclosure (FIG. 4) has a power receptacle that will
accept all major international standard power sources. (US power cords are included with all shipments
unless ordered otherwise.) Maximum power specifications are provided on the power supply
receptacles.
For information on applying power, see page 34.
The power supply unit has three LED indicators (in order from left to right):
AC (
): When the LED is green, the power is good.
DC (
): When the LED is green, the power is good.
Temperature (
): When the LED is not illuminated, the temperature is good (when the LED
is amber, the temperature is above normal).
Caution: Each power supply has a small toggle switch to the left of its LEDs that controls internal
power and must remain flipped to the right for the system to operate. Do not flip this switch to the left.
Input and Output Boards
A single enclosure can handle a combination of signals: the DVI boards support DVI-D signals, and the
SC Optical boards support DVI-D, analog video*, and digital or analog stereo audio signals. All signals
are automatically converted to the output device’s format, with DGX Fiber Modules used in the
conversion process for the DGX 32 SC Optical boards.
Epica DGX 32 enclosures have 16 vertical board slots (8 slots each for input and output boards with four
connectors each), allowing for a maximum configuration of 32x32.
For information on the boards included in your system, including connector types, cabling directions,
and specifications, see the specific board chapter in this manual. For information on adding or replacing
boards, see “Appendix E
–
Board Replacement” on page 137.
* Supported analog video signals include RGBHV, RGBS, RGsB, and Y/Pb/Pr.
FIG. 4
Power supply receptacles, LEDs, and switches
FIG. 5
DGX 32 DVI and DGX 32 SC Optical Input and Output Boards
3 Indicator LEDs
Leave switch on
(flipped right)
DGX 32 DVI Board
DGX 32 SC Optical Board
Input boards
Output boards
Empty board slots can be used
to upgrade system
Содержание Epica DGX 32
