Working With IR Files
67
DXP-HT v1.3 - Programmer’s Guide
Working With IR Files
Selecting an IR File to Use
Once you have found the IRL file that you want to use in association with the device (as specified in
the Device Configuration dialog):
1.
Select the IR file from within the Search Results table.
2.
Verify the file is correct by reviewing the file information from within the lower IR file section.
3.
Use the vertical scroll bar (adjacent to the file description on the lower left of the dialog) to
display more of the file information that it cannot fit into the pre-defined space.
4.
Click the
Use
button. This closes the Search for IR File dialog, and returns you to the Source
Configuration dialog (Source Data tab), where the (read-only) IR Data field is populated with
information for the selected IR file.
Searching for IR Files (Search Criteria)
1.
Enter the parameters for the search criteria. This Search Criteria options in this dialog allow
you to search for IRL files by:
Manufacturer name
Hand Control Model #
Device Model #
While you can search by any one of these three criteria, try to narrow your search by supplying
as much info as is possible.
2.
For each of these search fields, a user can select
Contains
,
Begins With
, or
End With
from the
drop-down lists.
3.
Press the
Search
button to begin the search for the desired type of IR file.
4.
The
Search Results
table lists the IRL files found matching your search criteria. The number of
matching files is also displayed.
5.
Click on any listed IRL file in this table to view additional information for that file within the
lower (read-only) IR file…section of the page (
Manufacturer
,
Hand Control Model #
,
Device
Model #
, and any additional
Info
that was associated with the selected IR file when it was
created.
Use the adjacent vertical scroll bar to display more of the matching IR files found by the search.
