AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE Скачать руководство пользователя страница 48

Страница: 48 / 108

Using the DXP-HT Project Wizard

DXP-HT v1.3 - Programmer’s Guide

The identifier entered into the

Preset Name

text box is the name that will be displayed on

the touch panel. No duplicates allowed (8 characters maximum).

The

Address

field correspond to either the lighting controller address and the preset

number (as with AMX Radia), or the address of the keypad and the keypad button that

will be emulated (as with the LiteTouch controller).

For the AMX ALD-D48, the address is the 7-digit ID number of the ALD-D48 Device

Server.

For the AMX Radia the address is the AXlink address of the Radia MC.

The only valid keypad address characters are 0-9, A-F, and : (colon). For reference, here

are the formats for the various supported lighting systems:

Click the

Apply

button after editing a preset to apply the changes.

The

Button #

refers to the button number or scene number the DXP-HT system is to

emulate when communicating to the lighting system.

For

AMX Radia

, the button # is the scene number to be recalled when this scene is

selected on the touch panel.

For

Clipsal C-Bus

and

Dynalite

systems (used primarily outside the U.S.), the button #

consists of the button number plus the fade rate, separated by a semi colon. For example:

(C-Bus):

K:P:[A4:E1]:75:8

indicates network $E1, group address $A4, go to 75%

at 8-second fade rate.

Lighting Controller

Address Format

DXP-HT Example

• AMX ALD-D48

The Address value is fixed at a value of one
and is disabled. This value corresponds to the
Device ID of the keypad.

1 (read-only)

• AMX Radia

AXlink Device ID (1-255)The Address is the
AXlink device ID of the Radia MC.

• Clipsal C-Bus

Group Address:Network Address (using a hex
value and a local network address)

A1:D4

• DynaLite

DynaLite area (positive integer)

• Lehigh DX2

Lehigh area (1 - 16)

• Lutron GRAFIK Eye

Master (positive integer)

• Lutron Homeworks

Interactive

Processor:Link:Keypad (positive integers)

1:4:9

• Lutron RadioRA

Keypad Address (positive integer)
Note: keypad address 12 is reserved as the
RS-232 RadioRA interface. This interface is a
virtual keypad, and does not contain any but-
tons.

• LiteTouch 5000LC

Keypad Address (3 nibble hex value

A3E

• Tridonic DALI

Tridonic group address (0 -15)

• Vantage Qlink

Master:Keypad (positive integers)

1:5

For the AMX ALD-D48, the Address field value is fixed at a value of one (1) and is
read-only. This value corresponds to the Device ID of the keypad.

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE













































































































Результаты поиска

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE

Отзывы:

Бренды по названию

Популярные бренды

AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE, Инструкция по эксплуатации

Результаты поиска

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE

Отзывы:

Бренды по названию

Популярные бренды