Using the DXP-HT Project Wizard
37
DXP-HT v1.3 - Programmer’s Guide
Click
Apply
to apply any changes made to the selected device.
Click
Clear
to clear the
Input Type
,
Physical Label
,
Select Command
and
Display Device
(if applicable) information for the selected device.
Surround Sound Presets dialog
The Surround Sounds Presets dialog sets up the Surround Sound Modes screen on the touch panel.
The
Surround Sound Modes for Receiver
table lists all of the declared Surround Sound Modes.
The columns can be sorted by the display
Order
, or the
Display
Name
.
The text entered into the
Display Name
text box is used on the buttons for the touch panel's
Surround Sound Mode screen.
• Input Type:
This field differentiates audio-only inputs from A/V inputs. Select the
appropriate input from the drop-down list (Audio Only, Component, Com-
posite, HD Component, HD RGB or S-Video).
Note
: If you select any Input Type other than Audio Only, an additional
drop-down is displayed at the bottom of this dialog - Display Device (see
below).
• ·Physical Label:
Type the physical label (as it appears on the back of the receiver) that you
want to associate with the selected input device.
• Display Device:
This drop-down list is only available if you have selected an A/V input.
This list contains all of the IR commands listed for the device in the IR
Mapping tab of the Device Configuration dialog.
The
Control Method
and
Source Type
selected (in the Device Data tab of the
Device Configuration dialog) determine the amount of information available to DXP-
HT. For example, IR devices provide no information about inputs, so for IR devices all
possible input functions are provided (to be mapped). For RS-232 devices, as part of
the nature of the control method, the names (and types) of the inputs are known.
FIG. 8
Surround Sound Presets dialog
