AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE Скачать руководство пользователя страница 15

Страница: 15 / 108

Introduction

DXP-HT v1.3 - Programmer’s Guide

MAX Servers by AMX

MAX-MMS and MAX-IMS media servers are supported for G4 touch panels only, via Ethernet

control.

DXP-HT treats these devices essentially the same as any other Ethernet-controlled device (such as

MP3 players). There are just a few points to understand in order to add MAX servers to a DXP-HT

project:

The MAX-MMS and MAX-IMS servers are Ethernet-control only.

They must be used with AMX G4 touch panels (see Supported Touch Panels).

The MAX-AVM A/V Module(s) connected to the MAX-MMS server must be all set to

output to Zone 1.

Refer to the MAX-MMS and MAX-IMS Installation Guides (available online at

www.amx.com) for details.

Lighting

MP3 Players

• Philips

Pro DVD 175

• Sony

DVP-CX777ES

• Yamaha

DVD-C940

• Yamaha

DVD-S2300MK2

• AMX MAX-IMS / MAX-BSM

• AMX MAX-MMS / MAX-AVM

• AMX ALD-D48·

Note

: (FW build 2.1 or later, via ISCP only)

• AMX Radia·

• Clipsal C-Bus·

Note

: The Clipsal C-Bus and Dynalite lighting systems (DXP-

HT v1.1 or higher) are primarily used outside the U.S.·

• DynaLite

• Lehigh DX2

• LiteTouch 5000LC·

• Lutron GRAFIK Eye·

• Lutron Homeworks Interactive·

• Lutron RadioRA·

• Vantage Q

• Tridonic DALI

Note

: The Tridonic Lighting System type does not have feed-

back; therefore, the buttons in DXP-HT will not depress to
reflect feedback.

• Other Ethernet - user supplied/modified light

• Other Serial - user supplied/modified lights.axi

• Audio ReQuest ARQ2Pro

• Imerge

SoundServer

• Integra

NAS-2.3 Net-Tune

• Marantz

DH9300

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE













































































































Результаты поиска

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE

Отзывы:

Бренды по названию

Популярные бренды

AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE, Инструкция по эксплуатации

Результаты поиска

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE

Отзывы:

Бренды по названию

Популярные бренды