Using the DXP-HT Project Wizard
21
DXP-HT v1.3 - Programmer’s Guide
System Information dialog
The first dialog in the Project Wizard is the System Information dialog (FIG. 1). This dialog
contains the information used by Design XPress - Home Theater (DXP-HT) to create and program
the control system.
Double-click on any device in the list to access the Device Configuration dialog, containing all
control information associated with the device.
The following list describes the items in the System Information dialog:
Note that since the
Job Name
,
Created By
and
Company
names are also used in the NetLinx
program, the characters that you are allowed to use are
A-Z
,
a-z
,
0-9
,
-
and
_
. These fields are all
limited to 40 characters.
FIG. 1
System Information dialog
• Job Name:
Enter the name of the project here. Each new project should be given a
unique
Job Name
and
Description
.
• Created By:
This field is pre-populated, if this information was entered in the User Infor-
mation dialog. Otherwise, enter or edit the name of the project author here.
• Company:
This field is also pre-populated, if this information was entered in the User
Information dialog. Otherwise, enter or edit the name of the company here.
• Description:
Enter a description of the project here (8190 characters maximum). Any
alphanumeric character (including punctuation) can be used. Each new
project should be given a unique
Job Name
and
Description
.
