AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE Скачать руководство пользователя страница 37

Страница: 37 / 108

Using the DXP-HT Project Wizard

DXP-HT v1.3 - Programmer’s Guide

Control Logics are specific device behaviors that have been programmed into the NetLinx Code

either through Modules, System Calls or Include files. A list of the applicable Control Logics will

appear in the Control Logics combo box.

IR Data:

The IR Data section allows you to configure a number of settings for IR

controlled devices. The IR File field displays the currently selected IR file (read-only).

You can select an IR file using the

Browse

Search

buttons.

The

Search

button (binoculars icon) brings up the Search for IR File dialog, which

allows you to search by

Manufacturer

Hand Control Model

Device Model #

Once an IR file has been selected the information about the IR file is extracted and is

displayed in the text fields below the IR File area (at the bottom of the Search for IR Files

dialog).

IR File

: Use the

Browse

and/or

Search

buttons to locate and select the IR file to be

associated with this IR-controlled device.

Manufacturer, Hand Control Model #, Device Model #, Info

: These read-only

fields are populated with information, once an IR file has been associated with this

device. When any IR-controlled device is selected, two additional tabs become

available on this dialog:

Serial Data

: Click the down-arrow to open a drop-down list of all supported baud rates

for serial control. Click to select the appropriate baud rate for the serial-controlled device.

This field is only enabled if Serial was selected as the Control Method, and if the device

does not have a default baud rate setting.

•

Control Method radio buttons

: Use the radio buttons to specify the method of control for this

device (IR, Serial or IP). This selection determines the other
options that are enabled in this tab.

Note

: If a Video Display device (such as a Projector/Plasma and TV) is chosen to be controlled

via Serial (RS-232), two new fields become available within the Device Data section: the

Use

remote serial interface

option, and a

port selection

drop-down list. Place a checkmark in the

Use remote serial interface checkbox to indicate that you are using an external serial interface
(leave it unchecked to use a Serial port on the Master).

If this option is checked, you can choose which port on the COM card to use by choosing a port
from the drop-down list. This was implemented to communicate to some display devices that are
not located near the Master.

• Control Logic:

Select a type of control logic from this drop-down list, if appli-
cable.

is selected, you must locate the associated IRL file by using the Browse or

Search buttons. If you are using

Serial

as a Control Method, choose the device from

the Control Logic drop-down list.

All options in the IR Data section of this tab are disabled if

Serial

was selected

as the Control Method.

• IR Mapping