AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE Скачать руководство пользователя | Manualshive

Страница: 42 / 108

background image

Using the DXP-HT Project Wizard

34

DXP-HT v1.3 - Programmer’s Guide

Govern Power

- This option enables governing power to the device, which means that

the System constantly monitors power to the device (for use with power sensors) rather

than simply toggling power On/Off.

Device/Power Feedback

- This option enables the display of power status of the device

on the touch panel. If this option is enabled, use the radio buttons to specify a

Power

Sensing Method

, based on the type of power sensor being used with the device (

PSS2

,

VSS2

or

TVS

).

Power Sensing Method

- Activated by enabling the

Govern Power

option (described

above). Use the radio button to select the method of power sensing being used. This

available power sensors include: PCS2 (Dual Power Current Sensor), VSS2 (Video Sync

Sensor), and TVS (TV Sensor).

IR Timing Parameters

- Use the up/down arrows to adjust the time gap between

Power

On

and

Power Off

IR pulses, in 1/10 second increments (default = 50).

Working with MAX Servers

DXP-HT v1.3 (or higher) supports MAX-MMS and MAX-IMS media servers. DXP-HT treats

these devices essentially the same as any other IP-controlled device (such as MP3 players). There

are just a few points to understand in order to add MAX servers to a DXP-HT project:

The MAX-MMS and MAX-IMS servers are IP-control only, and they must be used with

AMX G4 touch panels (see Supported Touch Panels).

Each MAX-AVM A/V Module connected to a MAX-MMS server must each be set to a

unique zone number (per server).

If multiple MAX-MMS or MAX-IMS servers are used in a project, each server must have

its own unique IP Address.

Refer to the MAX-MMS and MAX-IMS Installation Guides (available online at www.amx.com)

for details.

Each device IP Address must be unique, with only one exception: MAX servers can
use one IP with multiple output zones per display name entry. For example, a MAX-
IMS assigned to IP Address 1.1.1.1 - Zone 1 can exist in the same project as another
MAX-IMS assigned to IP Address 1.1.1.1 - Zone 2. But you cannot assign two MAX
servers with the same IP Address and Output Zone (you will receive an error
message).

«
...
40
41
42
43
44
...
»

Содержание DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE













































































































Отзывы:

Нет отзывов

Похожие инструкции для DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE

Бренд: 3M Страницы: 3

ADMINISTRATION KIT 6.0

Бренд: KAPERSKY Страницы: 115

RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND

Бренд: Tech Source Страницы: 36

MPS API Interface D13639

Бренд: TANDBERG Страницы: 84

Бренд: I.R.I.S. Страницы: 182

IronKey Workspace Provisioning Tool 1.0

Бренд: Imation Страницы: 19

Бренд: Allied Telesis Страницы: 46

Бренд: AMX Страницы: 16

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 33

Бренд: Acer Страницы: 118

Бренд: Billion Страницы: 18

[email protected]/DOS Version 7.xx

Бренд: Amanda Страницы: 84

Amanda Portal CallQ Agent

Бренд: Amanda Страницы: 61

Amanda Portal Telephone Features

Бренд: Amanda Страницы: 226

PARTNER ACS PC Administration

Бренд: Avaya Страницы: 56

Бренд: Avaya Страницы: 61

Бренд: R&S Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды