Using the DXP-HT Project Wizard
56
DXP-HT v1.3 - Programmer’s Guide
Add
: Click to add the selected macro function to the bottom of the Macro Steps list.
Delete
: Select a step in the Macro Steps list and click Delete to remove the selected step
from the macro.
Insert
: Select a row in the Macro Steps list table, and click Insert to insert the selected
macro function to the Macro Steps list, in the row above the selection.
Apply
: Click to apply any changes made to a selected macro step.
Clear
: Click to clear the macro function from a selected macro step, without removing
the step from the list.
• Device Function:
Use this tab to add a device and device function to the macro. Click the down
arrow to access the Device drop-down list of devices defined in the System
Information dialog. Once a device has been selected, a second set of func-
tion-oriented drop-down lists becomes available. Select a device function to
be added as a macro step, and click Add to add the device function to the
Macro Steps list.
• Lighting Presets:
Use this tab to add a lighting preset to the macro. Select a defined lighting
preset from the Lighting Presets drop-down list, and click Add to add the pre-
set to the Macro Steps list.
• Channel Presets: Use this tab to add a channel preset to the macro. Select a source tuner
device from the Source Device drop-down list. Once a source device has
been selected, the Channel drop-down list becomes available. Select a
channel preset from the list and click Add to add the selected channel preset
to the Macro Steps list.
• Tuner Presets:
Use this tab to add a tuner preset to the macro. Select a tuner preset from
the Preset drop-down list and click Add to add the selected channel preset to
the Macro Steps list.
• Relays:
Use this tab to add a relay function to the macro. Select a relay action (Close,
Open or Stop) from the Action drop-down list and click Add to add the
selected relay function to the Macro Steps list.
• Surround Sound:
Use this tab to add a surround sound mode preset to the macro. Select a sur-
round preset from the Surround Sound Mode drop-down list and click Add to
add the selected surround preset to the Macro Steps list.
• Custom:
This tab allows experienced NetLinx programmers to manually develop cus-
tom macro functions. Select a CustomMacroFunction from the Execute drop-
down list (start with CustomMacroFunction01). This adds the "shell" of a cus-
tom macro function to the Custom Macro Function.AXI file. Custom macro
functions require that you manually enter the code for the custom macro
function (in the NetLinx Studio application).
