Using the DXP-HT Project Wizard
25
DXP-HT v1.3 - Programmer’s Guide
When you select a desired CD/DVD model from the
Control Logic
field, the changer size
is automatically filled and is read-only.
The control method(s) available for selection depend on the device type specified.
4.
Select the required baud rate for the serial device from the
Baud Rate
drop-down list. (if
applicable).
Adding IP-Controlled Devices to the Project
To add a device to your system, click the Add button in the System Information dialog. This opens
the Device Configuration dialog - Device Data tab.
In the Source Configuration dialog (Source Data tab):
1.
Select the type of equipment you are adding from the
Source Type
drop-down list.
2.
Enter a name for the device in the
Display Name
field. This is the name for the device that will
appear on the touch panel.
3.
If the device is a Compact Disc Player or Digital Video Disc player, specify the size of the disc
changer (if applicable; by default this field is set to
1
).
4.
Use the radio buttons to select
IP
as the
Control Method
associated with the new device.
5.
Enter the
IP Address
of the ethernet-controlled device.
Adding a MAX-IMS or MMS Server to the System
To add a MAX-IMS or MAX-MMS server to your system, Click the Add button in the System
Information dialog to open the Device Configuration dialog - Device Data tab.
1.
Select
AMX MAX
from the
Source Type
drop-down list.
2.
Enter a name for the device in the
Display Name
field. This is the name for the device that will
appear on the touch panel.
3.
Select the
Control Logic
, based on which type of MAX server you are adding (either IMS or
MMS).
4.
In the
IP Data
field, enter the MAX server's IP Address.
5.
Select an
Output Zone
number, which must be unique per each server used in a project. For
example, if a system has two MMS servers, each MMS could have an Output Zone 1.
The valid ranges are:
MAX-IMS = 1 to 8
MAX-MMS = 1 to 25
The control method(s) available for selection depend on the device type specified.
Each device IP Address must be unique, with only one exception: MAX servers can
use one IP with multiple output zones per display name entry. For example, a MAX-
IMS assigned to IP Address 1.1.1.1 - Zone 1 can exist in the same project as another
MAX-IMS assigned to IP Address 1.1.1.1 - Zone 2. But you cannot assign two MAX
servers with the same IP Address and Output Zone (you will receive an error
message).
