Merge Path Data
Used to replace automation data from one Mix/Pass in another Mix/Pass. Each Mix/Pass must be in the current
Mix/Pass Tree.
To select the data to merge click on Merge Path Data in the drop down Mix menu. The Merge Path Data
dialogue box will be displayed.
Enter the required source Mix/Pass in the Take From Here box and click the Current Pass button to use the
current Play Pass.
Enter the required destination Mix/Pass in the Insert Here box and click the Select Mix button to select a Mix/Pass
from the Load Revision dialogue box.
The same Mix/Pass cannot be used for both the source and destination.
Click the Faders, Mutes, etc. check boxes to select which parts of the automation data to erase.
Click on the required paths in the paths list. The selected paths will be highlighted in the list. Click the Select All
button to highlight all paths.
To set the timecode range enter the Merge From and Merge To times manually or click the Select From List
button to choose times from the Label List in the Start And End Times dialogue box.
To merge the data click the Merge button. The Merge Path Data dialogue box will close and a dialogue box will
be displayed to confirm that the new Mix/Pass was created. The new Mix/Pass will be shown on the main screen
as the current Play Pass.
Automation Menu
Merge Path Data
Issue 4
Page 19:4