Amazone EDX 9000-TC, Руководство по эксплуатации

Страница: 220 / 246

Cleaning, maintenance and repairs
220 EDX 9000-TC BAH0048-6 09.2019
12.5.6 Checking the fertiliser coulter furrow former
The new furrow former must not
protrude too far beyond the edge of
the coulter disc. The worn furrow
formers can be individually replaced
up to a coulter disc diameter of 370
mm.
1. Loosen the nuts (Fig. 317/1) and remove
them.
2. Uninstall the worn furrow formers (Fig.
317/2).
3. Mount new furrow formers.
4. Fit on the nuts.
5. Adjust the gap between the furrow former
and coulter disc to 1-2 mm by tightening the
nuts differently.
6. Lock the nuts.
Fig. 317
12.5.7 Checking the wear bushing on the support roller arm
1. Check the condition of the wear bushing.

Replace the wear bushing in a timely
manner before the setting spindle damages
the support arm.
2. Loosen the bolt (Fig. 318/4) and remove it.
3. Dismount the support roller arm (Fig. 318/2)
with the support roller.
4. Remove the spot weld on the rear (Fig.
318/3).
5. Dismount the worn bushing (Fig. 318/1).
6. Insert a new bushing.
7. Place spot weld on the rear (Fig. 318/3).
8. Mount the support roller arm with the
support roller.
9. Fit on and tighten the bolt.
Fig. 318