Amada MU-100A, Руководство по эксплуатации, Страница: 69 / 114

MU-100A
11. Timing Chart (1-axis Type)
11-8
(4) Sample Hold 2 Mode “Disp Measure Mode : SH2(3)”
When 0=Setup parameter of the function menu is set as follows:
1
Disp Measure Mode setting: SH2(3)
4ms
3ms
2ms
2ms 1ms
(*1)
13ms
LEV-DISP1 set displacement
20ms min.
Displacement change
Internal
zero reset
GOOD output(*2)
FINISH output(*2)
NG output(*2)
After Weld Work measurement
ST-DISP1 input
Squeeze-Time(setting)
Weld-Time(setting)
(Weld start output)
Welding(power supply)
LEV-DISP11 to 13 output (*3)
After Weld Work
measurement position
*1 Set the time longer than the total weld time of welding machine for Weld-Time.
*2 The output time can be selected with Output Select Time.
*3 The output time can be selected with Level Select Time.