Amada MAWA-300B-00-00 Скачать руководство пользователя страница 62

Страница: 62 / 168

MAWA-300B

3. Operating Unit

3-1

3. Operating Unit

(1) Front

Panel

IMPORTANT

Operate the switches and touch panel display carefully by hand. If they are operated violently

or by using a screwdriver or pen point, this will result in damage.

Operate each of the switches and touch panel display once a time. If multiple switches are

operated at the same time, this will result in a failure.

Do not move the main power switch lever up within 3 seconds after power-off. If the main

power switch lever is moved up immediately after power-off, the power is not supplied during
about 10 seconds due to the surge protective function.

Main power switch

The power supply is supplied by moving the switch lever up.
The power supply is shut off by moving the switch lever down.

Touch panel display

This displays condition settings, monitor values, error codes, and messages that are used for
the welding power supply.

Switch lever

Содержание MAWA-300B-00-00









































































































































































Результаты поиска

Содержание MAWA-300B-00-00

Отзывы:

Amada MAWA-300B-00-00, Руководство по эксплуатации, Страница: 62 / 168

Результаты поиска

Содержание MAWA-300B-00-00

Отзывы: