Amada MAWA-300B-00-00, Руководство по эксплуатации, Страница: 52 / 168

MAWA-300B
2. Installation and Connections
2-22
(3) -1-3. Option input/output connector (D-Sub 25-pin, male)
Remarks
z Every input terminal is a photo coupler input of +24 V DC/approx. 10 mA.
z
Output terminals are output by photo relay and the rating is +24 V DC/100 mA.
z For the customer-prepared motor head, use this connector input/output.
z Refer to the timing chart in “6. (7) Touch Start Option Input/Output Signals.”
Option input/output signals
Terminal No. Terminal name Explanation
1 H-ST1 Initial current start input terminal.
2 H-COM Common terminal of the input terminals (1 and 3 ~ 7).
3 H-READY Head operation ready input terminal.
4 GAS Gas start signal input terminal.
5 (Unused) -
6 H-ST2 (*1) Main welding start input terminal.
7 H-ERROR Motor controller error signal input terminal.
8 H-COM Common terminal of the input terminals (1 and 3 ~ 7).
Input
23 EXT_COM2 Common terminal of the input terminal.
9 H-OUT_COM Common terminal of the output terminals (10 ~ 14).
10 H-END End signal output terminal.
11 H-ORG Return-to-start point signal output terminal.
12 H-RESET Reset signal output terminal.
13 M-READY Operation ready output terminal.
14 H-HEAD UP
Head go-up start signal output terminal.
Output when a user input “H-HEAD UP” is set and the
“H-HEAD UP” signal is input.
15 H-OUT_COM Common terminal of the output terminals (10 ~ 14).
16 H-STOP Head emergency stop signal output terminal.
17 H-STOP_COM
Common terminal of the head emergency stop signal output
terminal.
18 (Unused) -
19 (Unused) -
20 H-CY VLV Cylinder solenoid valve signal output terminal.
21 H-CY VLV COM
Common terminal of the cylinder solenoid valve signal output
terminal.
22 H-MODE (*2)
Terminal for switching the auto mode and the fine weld mode.
When the circuit is open,
“auto mode” is selected.
When the circuit is closed,
“fine weld mode” is selected.
24 0V 0 V output terminal.
Output
25 24V 24 V output terminal.