Altigen ACM 6.5, Руководство администратора, Страница: 467 / 502

MAXCS ACM 6.5 Administration Manual 453
Figure 3. Signaling Layer
6. In the E1 Channel Configuration dialog box, configure the following fields:
•
Set Calling Party Category to —the Calling Party Category indicates the type of
calling party, (for example, operator, pay phone, priority, ordinary subscriber).
Select
1 , 2 or 3 (for ordinary subscribers, refer to Table 1 on page 454). If the
subscribed line is intended for other purposes, contact your CO for the proper
value.
•
Add extra digits before caller ID —consult your CO to find out if any extra digits
are needed.
•
Incoming sequences —select check box and configure the sequence according
to Table 1 on page 454.
•
In-call signaling —configure the in-call signaling value according to Table 1 on
page 454.
The circled fields in Figure 3 represent values that depend on your country and its
corresponding trunk property.
Note:
Consult your CO to find out if caller ID digits are provided in the lines.