Altigen ACM 6.5 Скачать руководство пользователя страница 453

Страница: 453 / 502

Trace Collector

MAXCS ACM 6.5 Administration Manual 439

Voice File Converter

This tool converts phrase, greeting, and music files from .wav to AltiGen format and vice

versa. To open the tool, from the Windows

Start

menu, select

All Programs > Utilities

> Voice File Converter

Note:

The source .wav file must be in 8k/8bit/mono/mu-law format.

To use the Voice File Converter:

1. Beside the

From

field, click the Browse button to select the folder that contains the

files you want to convert.

2. Beside the

Convert To

field, click the Browse button to select the destination folder

for the converted files. If they are prompts, they should be placed in the

C:\PostOffice\phrases\LangCustom

directory on the gateway that is running

MAXCS. If the files are music files, they should be placed in the

C:\PostOffice\Phrases\Music

directory. A file that you want to use for music on

hold must be named MusicOnWaiting. To save the AltiGen system MusicOnWaiting
file, rename it before replacing it.

3. Check the files you want to convert.
4. In the Format panel, select a format.
5. Click

Convert

If a file format is incorrect, an error message pops up.

You can sort by clicking a
column head

Содержание ACM 6.5























































































































































































































































































































































































































































































































Результаты поиска

Содержание ACM 6.5

Отзывы:

Altigen ACM 6.5, Руководство администратора, Страница: 453 / 502

Результаты поиска

Содержание ACM 6.5

Отзывы: