Altigen ACM 6.5 Скачать руководство пользователя страница 418 | Manualshive

Страница: 418 / 502

Altigen ACM 6.5 Скачать руководство пользователя страница 418

Chapter 28: Microsoft Exchange Integration

404

MAXCS ACM 6.5 Administration Manual

3. In MaxAdmin, choose

System > Voice Mail Configuration

, then select the

Exchange Integration mode you want to use, and enter the name (

not

the IP

address) of Exchange server (see Figure 5).

Figure 5. Choosing the

Synchronize

Exchange Integration mode in MAXCS

4. Configure the names of each extension user such that the first and last names are

the same as the user’s matching mailbox on the Exchange Server.

Note:

The

Middle Initial

field should be

empty

for Exchange Server mail accounts

in order for Exchange integration to work properly.

5. MAXCS matches the mailbox on the Exchange Server via the display name, which is

a combination of “FirstName LastName”. In the example in Figure 6, the display
name is “Michael Wang”, so you should make sure the user’s display name on the

Exchange Server is “Michael Wang”, or synchronization will fail.

Figure 6. First name and last name in MAXCS must match the display name in Exchange

Server, or synchronization will fail. (Also, to synchronize MAXCS voice mail with
Exchange voice mail in Bridged Access mode, you must have checked the

Enable Synchronization

check box in the Voice Mail configuration screen.)

Select the Exchange

Integration mode
you are going to use.

Enter the NAME (not

the IP address) of
the Exchange Server

«
...
416
417
418
419
420
...
»

Содержание ACM 6.5























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов