Alpha Group OutBack Power MATE3, Руководство пользователя

Страница: 68 / 160

Inverter Settings
66
900-0117-01-00 Rev A
LCD Display
Ambient lighting and personal eyesight varies with every installation. Therefore, the contrast, color,
brightness, backlighting, and auto time-out of the LCD can be adjusted to provide the best visibility for a
given location.
To access the
LCD Display
menu:
1. Access the System Settings menu as shown in Figure 59.
2. Use the control wheel to highlight the LCD Display menu.
Press the button in the center of the control wheel to accept the selection.
3. Use the control wheel to change the value of each set point.
Press the button in the center of the control wheel to accept the selection.
The selection should automatically advance to the next set point when the button is pushed.
Repeat for each set point.
4. After setting the parameters for each set point, press the
TOP
navigation key to return to the System
Configuration screen.
Figure 62 LCD Display
Set Points:

Contrast – Range = 1 to 100, from lowest contrast to highest contrast.

Color – Range = 1 to 216 discrete display colors.

Brightness – Range = 1 to 10, from dimmest to brightest.

Backlight = On, Off or Auto (see Auto Timeout below).

Auto Timeout
– The amount of time that will elapse before the screen backlight turns off.
Range = 1 to 300 seconds.