Alpha Group OutBack Power MATE3, Руководство пользователя

Страница: 64 / 160

Basic Programming
62
900-0117-01-00 Rev A
Figure 58 Set Points
Settings Menus

The system Settings menus are used for programming functions for the overall system
(e.g., date & time, communication options).

The device Settings menus are used to program the various system components
(e.g., inverter, charge controller, battery monitor, and MATE3 system display and control.

The Settings menus are accessed in the Main Menu using the
Lock
key.
See Figure 56 on page 60 for instructions on entering the Main Menu .
IMPORTANT:
If multiple inverters are used in the installation, make certain to change
settings as appropriate for each inverter on its assigned port. Changing
settings for a single inverter in a multiple-inverter system may result in conflicts
in operation.
Settings Menu See pages.... Notes
System
63 to 72
Inverter
75 to 93 See the inverter Operator’s Manual for details about functional
features of the inverter.
Charge Controller
95 to 105 Detailed information about basic setup for a FLEXmax charge
controller is available in the
FLEXmax 60/80 Charge Controller
User’s Manual .
Battery Monitor
106 to 111 Detailed information about basic setup for a FLEXnet DC is
available in the
FLEXnet DC User’s Manual .
MATE3 112 to 133
Set Points

Set points are adjustable settings for
each specific menu item.

Set points will vary depending on the
system configuration.

Set points are highlighted when
adjustments are available. Use the
control wheel to increase or decrease
the set point values.