Allmand Maxi-Lit II, Руководство оператора

Страница: 43 / 260

Not for
Reproduction
MAXI-LITE II / MINE SPEC / RIG SPEC
3-13
TURNING ON THE LIGHTS
The tower light control panel contains the breaker
switches that control the trailer lights (one switch per
light).
The four or six light fixtures are controlled and
protected by four or six breaker switches located on the
light control panel. For additional information, see
“ CONTROL PANEL OVERVIEW ” on page 1-10. The
switches work just like a regular circuit breaker in your
home. Normal settings are ON and OFF. If a breaker
trips, it is in the “center” position, and you have to turn it
all the way OFF and then back ON again.
SEQUENCED LIGHTING SYSTEM (SLS)
The lights are automatically controlled by the
sequenced lighting system (SLS). Simply leave the
breaker switches in the ON position for automatic light
control. However, the breaker switches may be turned
off for individual light control.
To turn the lights on:
Start the engine and the lights will sequence on
automatically.
Turn one or more light breaker switches to the OFF
position for individual light control.
To turn the lights off:
Turn the engine off, and the lights will shut down
automatically.
The lights will turn off a fraction of a second ahead of
engine shutdown; this prevents capacitor damage.
SHUTDOWN PROCEDURE
To shut down for a short period of time:
1
With the lights off, lower the light tower to the full
down position.
2 Turn the engine off.
To shut down for a long period, or to prepare for
trailering:
• When shutting down the light tower for long
periods of time or when preparing to trailer, refer to
“ PREPARING FOR TRAILERING - SHUTDOWN ” on
page 4-3 .
en