Allmand Maxi-Lit II, Руководство оператора

Страница: 22 / 260

Not for
Reproduction
2-2
SAFETY
SAFETY DEFINITIONS
Safety statements are one of the primary ways to call
your attention to potential hazards. Review and
become familiar with the various precautions included
throughout the manual. We recommend that you do
this before operation, during operation, and during
periodic maintenance procedures. This is extremely
important for your safety and the safety of others, and
to avoid damage to your equipment.
Keep all equipment information and safety decals clean
and visible and replace them if they become damaged
or unreadable. Also, if a part needs to be replaced that
has a decal attached to it, make sure to order the new
part and decal at the same time.
This safety alert symbol appears with most
safety statements. It means pay attention,
become alert, your safety is involved! Read
and abide by the message that follows the
safety alert symbol.
DANGER
Indicates a hazardous situation which, if not avoided,
will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or serious injury.
NOTICE
Indicates a situation which can cause damage to the
equipment, personal property, and/or the
environment, or may cause the equipment to
operate improperly. Also included to make
procedures easier or clearer.
SAFETY PRECAUTIONS
There’s no substitute for common sense and safe,
careful work habits. This information contains general
safety precautions and guidelines that must be
followed to reduce the risk of injury to you and others.
Special safety precautions are listed in specific
procedures. Read and understand all of the safety
precautions before operating the machine or
performing repairs or maintenance on your equipment.
This safety section can’t cover every situation that may
occur in the use of the equipment. If you are uncertain
about any of the information or any procedure in the
manual, contact Allmand service department at 1-800-
562-1373, for clarification. Your safety is important to us
and we’re happy to help.