Alcatel OmniTouch ACS 7.1.4, Руководство по подготовке площадки

Страница: 15 / 150

Hardware setup Facility Planning
............................................................................................................................................................................................................................................................
8AL90212USAC ed01
November 20, 2008 2 - 3
............................................................................................................................................................................................................................................................
Hardware setup
Although the exact hardware varies, all Alcatel-Lucent OmniTouch My Teamwork
servers must have two Ethernet ports. The
primary Ethernet port (eth0) is used to connect
the server to your network. The secondary port (eth1) is used for internal connections,
which vary according to your configuration.
If you are connecting your server to the PSTN, your server also includes a PSTN card
(TDM Network Interface Module 1 span 2 span 8) in one of your server’s PCI slots. The
PSTN card has an Ethernet port, and up to 8 trunk ports (T1 or E1).
A standard server configuration usually has two 72GB drives (that is, usually a RAID
configuration).
Disk allocation
Standard disk allocation
16GB for root
12GB for /var
2GB for swap
Remainder for /slides:
50% for recordings, presentations, and attachments
50% backup/restore
Disk allocation for a 72GB drive
16Gb for root
12GB for /var
2GB for swap
20GB for recordings, presentations, and attachments
20GB backup/restore
A one hour audio recording takes up approximately 27.5 MB. The space required for an
audio presentation recording will vary according to the size of the presentation.