Air Products GASGUARD TE10, Инструкция по установке, эксплуатации и обслуживанию

Страница: 150 / 196

GASGUARD
®
TE10 Distribution System Manual
Air Products and Chemicals, Inc. 8 - 26
8.8.3 Subcycle Parameters
This option displays the current values for the purge parameters. You may increase
these values, but may not decrease them below their pre-programmed minimum.
To change a setpoint, first select the analog input by touching the value you wish
to change. A key pad will appear on the screen allowing you to enter a number.
Pressing the key will change the value.
8.8.4 Leak Test Parameters
This option displays the current values for the leak parameters. You may increase
these values, but may not decrease them below their pre-programmed minimum.
To change a setpoint, first select the analog input by touching the value you wish
to change. A key pad will appear on the screen allowing you to enter a number.
Pressing the key will change the value.
All Decay Test parameters must have a
negative value for the pressure difference in
order to detect a leak and alarm.
8.8.5 Digital Inputs
This option displays a list of the digital inputs and their current state. The state may
be used to determine if the digital device is operating properly.
To scroll through the digital input values, use the and keys. NEXT> <PREV