Air Products GASGUARD TE10, Инструкция по установке, эксплуатации и обслуживанию

Страница: 88 / 196

GASGUARD
®
TE10 Distribution System Manual
Air Products and Chemicals, Inc. Page 4 - 8
4.4 External I/O Communication
Connections between the GASGUARD TE10 controller and external I/O devices are
made at the terminal blocks located inside the controller, on the back wall, left side.
See Figure 4.6 for details on the location of the connections.
Figure 4.6: I/O Terminal Blocks
The tables on the following pages list recommended external I/O communications and
detail digital output and digital input connections.
Specific I/O field wiring connections for this system are found on the drawings in the
document envelope, supplied with each system.
Additional I/O circuit boards may have been purchased as an option with this specific
system. If so equipped, termination for the additional points will be shown in the
drawings located in the document envelope.
Analog Expansion
Option