Air Products GASGUARD TE10, Инструкция по установке, эксплуатации и обслуживанию, Страница: 14 / 196

GASGUARD
®
TE10 Distribution System Manual
Air Products and Chemicals, Inc. Page i - 2
Note: Air Products recommends that the customer develop a specific "Work
Instruction" for each gas cabinet, rack system or distribution system. The work
instruction can be used as a step through check list procedure for trained
operators.
A standard industrial work instruction would include the following:
•
System identification number, gas service, basic description of system, etc.
•
Current operating data (pressure, etc.), date, time, operator.
•
Tools/supplies required for maintenance (PPE required for the gas, leak
testing equipment, gaskets, etc.)
•
Step-through procedural check list to include specific customer PPE
protocol, communications and customer leak test procedures.
Consult your local Air Products technical representative if you need assistance in
preparation of standard work instruction.
Section 1: Safety Warnings
This section provides the safety information needed to safely operate the system.
Material Safety Data sheets for the gases and the instrument nitrogen supply.
The
safety section is to be carefully read and understood before work is performed on
the system.
Section 2: Dimensions and Mounting
This section provides an overview of methods to mount the system as well as
envelope dimensions for typical systems.
Section 3: Tubing Connections
This section provides information for on site mechanical hook up requirements.
Section 4: Electrical Connections
This section provides information for on site electrical hook up requirements.
Section 5: Helium Leak Test
This section provides an overview on site helium leak test requirements.
Section 6: Distribution System Functional Checklist
This section contains a checklist to assure the system was installed properly.