Air Products GASGUARD TE10, Инструкция по установке, эксплуатации и обслуживанию

Страница: 134 / 196

GASGUARD
®
TE10 Distribution System Manual
Air Products and Chemicals, Inc. 8 - 10
11. From the Main Screen press and enter
the password.
12. From the Main Menu screen, select the Mode
Menu for the Line you want to operate.
13. From the Mode Menu, select START
ROUGH LINE.
Note: If manual valves must be opened or closed or their position
verified, an operator prompt will appear. The operator must push
when done, to continue with the program.
All manual valves on the Line purge inlets
(MV4-1, MV4-2, MV4-3, MV4-4) and vent
outlets (MV6-1, MV6-2, MV6-3, MV6-4)
should be closed during process flow and
idle modes. The specific valves should be
opened only during purging cycles and
manual mode operations.
15. At the end of the purge cycle, the Line status box at the top of the screen will
indicate "ROUGH LINE COMPLETE."
16. Verify the process gas source is on-line and set at the desired delivery
pressure, PT1 (process gas inlet maximum 90 PSIG.)
17. Ensure MV1, process gas inlet manual valve, is open.
18. Press and enter the password.