AGFA DRYSTAR AXYS, Руководство по обслуживанию

Страница: 103 / 461

DD+DIS033.07E
Repair and Service
Safety Guidelines / General Repair Instruction
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0 DRYSTAR AXYS Chapter 3.1 / 5
09-2007 Type 5367
Agfa Company Confidential
1.3 General Safety Note for all Service Actvities
1.3.1 Safety switch
•
The machine has one safety
switch, located below the top
cover.
•
It serves as a safety feature if
someone opens the machine
e.g. to remove a film jam.
When the top cover is opened, the
safety switch is activated.
It cuts off the voltage to all motors
and the print head.
S 8
536631aa.cdr
Figure 1
WARNING:
If the safety switch is overridden with a service key there are risks of
injuries.
Keep your hands and garments away from the device.
Remove service key before the device is handed over to the customer.
Before the printer is closed the service key must be removed again,
otherwise the mechanism of the safety switch may get damaged.
CAUTION:
Hardcopy loss if printer is removed from the mains:
Before removing the mains cable make sure that there are no films being
printed at this time.
CAUTION:
Sharp edges inside the device: Injury is possible.
Take care during maintenance and replacement of parts.