manualshive.com logo in svg

Aeroflex 2050T SERIES, Руководство по эксплуатации, Страница: 49 / 322

Поделиться
Скачать
Aeroflex 2050T SERIES Скачать руководство пользователя страница 49

INSTALLATION 

2-12 

Cleaning 

Before commencing any cleaning, switch off the instrument and disconnect it from the supply.  
The exterior surface of the case may be cleaned using a soft cloth moistened in water.  Do not use 
aerosol or liquid solvent cleaners. 

Cleaning the LCD window 

To prevent damage to the LCD window, care should be taken not to scratch the surface during use 
and also when cleaning.  The LCD window should be cleaned by wiping a slightly damp, soft, 
lint-free cloth gently over the surface  

Putting into storage 

If the instrument is to be put into storage, ensure that the following conditions are maintained: 

Temperature range: 

-40 to 70°C 

Humidity: 

 

Less than 93% at 40°C 

Содержание 2050T SERIES



































































































































































































































































































































Отзывы:

Нет отзывов