Aeroflex 2050T SERIES Скачать руководство пользователя страница 272

Страница: 272 / 322

OPTION 006 Avionics

Annex-A-11

Tone phase variability

For normal ILS operation the phase setting between the 90 Hz and 150 Hz tones is automatically
set to 0°. The

[90/150 Phase]

key can be used to adjust the phase relationship of the two tones.

Selecting the

[90/150 Phase]

key produces the display shown in Fig. A-9.

Fig. A-9 ILS variable phase sub-menu

Three phase relationships can be selected:

90 Hz sine/150 Hz sine

90 Hz cosine/150 Hz cosine

90 Hz sine/150 Hz cosine (

≡

90 Hz cosine/150 Hz sine)

Selecting

[DDM]

will return the instrument to normal ILS mode.

Marker beacon mode

The marker beacon mode is selected using the

[MARKER BEACONS]

key on the

Avionics Mode

Selection Menu

shown in Fig. A-3. Selecting maker beacon mode and pressing the [SIG GEN]

key produces the display shown in Fig. A-10. Initially the outer beacon is selected by default.
The

[Middle Beacon]

and

[Inner Beacon]

keys change the modulation frequency to 1.3 kHz and

3 kHz respectively. Carrier frequency and AM depth can be altered, but always default to 75 MHz
and 95% respectively. Modulation frequency can be changed using the

[Source Freq: F1]

key.

Modulation source can be changed using the

[Select Source]

key. Pressing the

[Avionics Modes]

key returns the display to the

Avionics Mode Selection Menu

Содержание 2050T SERIES



































































































































































































































































































































Результаты поиска

Содержание 2050T SERIES

Отзывы:

Aeroflex 2050T SERIES, Руководство по эксплуатации, Страница: 272 / 322

Результаты поиска

Содержание 2050T SERIES

Отзывы: