manualshive.com logo in svg

Aeroflex 2050T SERIES, Руководство по эксплуатации, Страница: 266 / 322

Поделиться
Скачать
Aeroflex 2050T SERIES Скачать руководство пользователя страница 266

OPTION 006  Avionics 

Annex-A-5 

Frequency accuracy: 

As frequency standard. 

Audio output: 

Available from the LF OUTPUT socket. 

ADF mode: 

Does not apply with Option 12 fitted.  Provides default modulation of 
30% AM depth on a 190 kHz carrier at 1 kHz modulation rate.  AM 
depth, carrier frequency and modulation rate can be changed from the 
default values. 

SEL-CAL MODE 

Provides amplitude modulation with SEL-CAL (SELective CALling) 
tones. 

Data entry 

By soft keys labelled A to S, of up to 2 pairs of characters. 

Timing: 

Default 1 s tone duration, 250 ms tone gap.  Tone gap, duration and 
start delay can be changed from the default values. 

Содержание 2050T SERIES



































































































































































































































































































































Отзывы:

Нет отзывов