ADT Commercial Fire & Burglary Alarm System FOCUS 200 PLUS, Инструкция по установке и настройке

Страница: 192 / 216

FOCUS 200 PLUS Installation and Setup Guide
20-4
Step Action
6 If you are using the backup dialer, temporarily disconnect the primary line and verify
signaling over the secondary line.
7 Verify that all signals have been received at the CCC.
8 Notify the CCC that the tests have been completed.
Testing the Printer
To test the printer, proceed as follows:
Step Action
1 Enter the Service Code to display Action Menu 1.
2 Select More twice to display Action Menu 3.
3 Select History to display the History Screen.
4 Select On printer.
5 Select Last 60 events.
6 Select Start Print.
7 Verify that the printer is printing the last 60 events.
8 Select Continue and Previous twice to exit.
Finishing the Installation
To finish the installation, proceed as follows:
Step Action
1 Exit the Service mode, and select Reset ADT off.
2 Put all forms, which must be stored with the control unit, inside the front cover of the
cabinet.
3 Close and lock control unit cabinet.
4 Check that an instruction label is included on the back of each operating panel installed.
Instructing the Customer
Instruct the customer in the use of the operating panel, including the availability of the help screens.
Give the customer the FOCUS 200 PLUS User Guide.