RK3000 High Frequency Power Supply
Operating Manual
Page 11 of 73
QUICK START CHART
For One-to-Many System Configuration
(See page 24)
A one-to-many system configuration is defined as a system where there
is one or more Keypad and Display Units communicating with one or
more Control Units, regardless of location. If you have only one Keypad
and Display Unit associated with only one Control Unit see the chart for
the One-to-One configuration.
Not all parameters and operating modes need to be programmed in order
to get the control(s) up and running.
To get started quickly follow the
instructions in the order that they appear below. This must be done
for each Keypad and Display Unit and each Control Unit (control
cabinet), as applicable.
1. Enter the security code (page 26).
2. Follow the ID set-up on page 25.
3. Program the Max Set Size (page 37).
4. Program the Limits (page 27).
The other parameters and operating modes have default values, based
on typical precipitator operation. They will allow the control and
precipitator to operate, but at less than optimum efficiency. All default
values should be reprogrammed, as needed, to optimize the precipitator
efficiency and minimize outlet emissions.
