Adobe 22020737 - Acrobat Pro - PC, Инструкция по использованию

Страница: 423 / 496

417
USING ACROBAT X PRO
Printing
Last updated 10/11/2011
More Help topics
“ About flattening ” on page 439
About separations
To produce high-quality separations, it helps to be familiar with the basics of printing, including line screens,
resolution, process colors, and spot colors.
If you are using a print service provider to produce separations, you’ll want to work closely with its experts before
beginning each job and during the process.
To reproduce color and continuous-tone images, printers usually separate artwork into four plates—one plate for each
of the cyan (C), yellow (Y), magenta (M), and black (K) portions of the image. When inked with the appropriate color
and printed in register with one another, these colors combine to reproduce the original artwork. The process of
dividing the image into two or more colors is called color separating, and the films from which the plates are created
are called the
separations .
Composite (left) and separations (right)
Print color separations
Acrobat supports host-based separations and in-RIP separations. The main difference between them is where the
separations are created—at the host computer (the system using Acrobat and the printer driver) or at the output
device’s RIP.
For host-based separations, Acrobat creates PostScript information for each of the separations required for the
document and sends that information to the output device. For in-RIP separations, the work of separating a file is
performed by the RIP. This method often takes less time than creating host-based separations, but it requires a
PostScript 3 output device with in-RIP separation capability. To produce in-RIP separations, you need a PPD file that
supports in-RIP separations, and any PostScript 3 output device or a PostScript Level 2 device whose RIP supports in-
RIP separations.
More Help topics
“ Previewing output ” on page 429
“ About preflight inspections ” on page 446
Prepare to print separations
❖
Before you print separations, do the following:
• Calibrate your monitor. See “ Calibrate and profile your monitor ” on page 396.