4/5
B 00
Safety instructions
G 01048 - Edition 06 - Januar
y 10
Emergency button
The pump is equipped with an emergency stop (EMO) circuit. When
activated, it places the equipment into a safe shutdown condition. For
external use, two EMO dry contacts are provided on connector J1 pins 1
and 4 (refer to page
B 100
2/2).
The pump EMO can also be externally monitored through connector J1 pins
2 and 3 (refer to page
B 100
2/2).
The EMO circuit consists of electromechanical components, and resetting it
will not re-energize the pump.
Safety interlock
The pump motors are protected against overload through the RT1 circuit
breaker (for the ADP pump) and RT2, RT3 circuit breaker (for the Roots
pump), which include solid state components, refer to page
G 110
for
electrical schematic.
These interlocks must never be overridden during installation, use or
maintenance.
Once activated, power will be switched off and the pump will be put in a
safe condition. When a fault occurs, the cause must be corrected before the
fault can be cleared. To clear the fault, it is required to switch power off,
main switch to “0“ position, before opening the electrical box and unlock
the circuit breakers.
Decontamination – product dismantling
According to the regulations 2002/96/CE about Waste of electrical and
electronical equipments, and 2002/95/CE about Restriction of Hazardous
substances, the manufacturer provides a recycling paid service for the end-
of-life of waste electrical and electronic equipment.
Any obligation of the manufacturer to take back such equipment shall
apply only to complete not amended or modified equipment, using adixen
Vacuum Products original spare parts, delivered by adixen Vacuum
Products, containing i.e. all its components and sub-assemblies.
This obligation will not cover the shipping cost to an adixen take back
facility.
Before returning the product, fill in the safety form, attach it to the product
before shipping to the service-repair office closest to you.
adixen Vacuum Products - Operating instructions - ADP/ADS Series Two
