ACS S10 Series, Руководство пользователя

Страница: 15 / 51

Chapter 2 Precautions for Operation
S10 Screenless Granulator 882.12058.00 • 05-01-2019 10
This chapter explains specific precautions of the product.
To prevent the occurrence of danger, precautions are described with
headings (Refer to Chapter 1-1) for the most important items.
1. Precautions for the operator
Heading Item Precautions
WARNING
Materials for use.
This equipment is a granulator for plastic sprues and runners.
Other materials are not appropriate for use, as they may become
a cause for accidents, trouble or damage (Product granulation,
wood chips, iron, non-ferrous metals, etc.).
Inserting any materials other than plastic material will void the
warranty.
WARNING
Operator and clothing
Do not perform an overhaul, cleaning or operating except by
authorized personnel’s’ approval.
Do not wear clothing which easily becomes entangled in the
equipment. Wear gloves so that you avoid injury.
2. Precaution of movement and installation
Heading Item Precautions
WARNING
Transfer & Movement Since this granulator is a heavy object, be careful not to tip it
over.
Injuries such as fractures will occur if caught under the
equipment.
When moving the granulator, watch for gaps, stairs, or grades on
the floor to prevent tipping over. Please pay attention.
WARNING
Electrical Ground Before operation, confirm that the ground wire is provided
securely. Without it, an electric-shock may occur.
WARNING
Supply-Power
North America = 60Hz. The control panel is dedicated for the power voltage of either 230
or 460 VAC, / 60Hz.
If the power voltage identifying label on the operation control
panel differs, please confirm it before plugging in the unit. If a
discrepancy is noticed, contact to our Service division.
3. Precautions of preparations for operation
Heading Item Precautions
WARNING
ANTI-RUST AGENTS
(AGR) At the time of initial delivery, wear gloves and wipe off AGR
(oil) that is applied inside the unit with a dry cloth only after
confirming cutoff of your primary power source.
※
Be sure to wears gloves so as not to cut your hands with the
cutter.