Acer Altos RAIDWatch, Руководство пользователя

Страница: 57 / 212

Configuration Options
43
• Enable: To enable the SNMPTrap settings, click on the “Enable” box in the middle of the
SNMP
Settings
window.
• Community: This is just a string authentication and can be seen as a plain text password.
3.5.5.2 SNMP Trap List
To configure the “SNMP Trap List” select the
SNMP Trap List
sub-tab from Figure 3–14. The
configuration options shown in Figure 3–15 will appear.
• Host IP: The port number of the agents listening for traps. Click Add to avail agents to the
Trap
Receiver List
.
• Severity is the parameter used to determine what levels of events to be sent via SNMP (1, all
levels; 2, Warning and Alert; 3, only Alert).
• Host Name: A list of listening SNMP agents.
Important Agent and NPC configuration parameters can be reconfigured later using the installation program.
Run the installation program and select Configure Only from the Start menu to reconfigure Agent
and NPC settings.
3.5.6 Broadcast Settings
To open the “Broadcast Settings” window, first open the
NPC Settings
window shown in Figure 3–
6, and then select the Broadcast Settings sub-tab. The Broadcast Settings configuration window
shown in Figure 3–16 will appear. There are two sub-tabs in the Broadcast Settings configuration
window, “Base Settings” and “Broadcasting List”.
Figure 3–15 SNMP Trap List Settings